Tankguard is a solvent-free, two-pack epoxy tank coating. This product is e.g crude oil – please contact Jotun for specific recommendations. Film thickness . Jotun Tankguard is a two pack solvent free polyamine cured epoxy coating. It is a general purpose tank lining with good chemical resistance. Tankguard can also be used for corrosion protection for the internal lining of steel storage tanks and for friction reduction in gas pipes – please contact Jotun.
|Published (Last):||22 March 2016|
|PDF File Size:||4.36 Mb|
|ePub File Size:||14.80 Mb|
|Price:||Free* [*Free Regsitration Required]|
On completion of the washing the tank shall be emptied of water by pumping. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person and not digitally to ensure that the colour is acceptable for its purposes.
Also available on special order in litre IBC containers, please contact Jotun for further information. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
Surface preparation All surfaces should be clean, dry and free from tankkguard. Afterwards the tank surfaces should be flushed with clean fresh water.
After the coating is fully cured, and before the tank is taken into use for potable water it should be thoroughly cleaned. An extra whip 1 m prior to the spray gun may be used. Send us your question. Tankguqrd Handle with care. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method.
Film thickness and spreading rate. Please select an option from the list above. Typical Tan,guard per coat. Two component polyamine cured novolac epoxy coating – specially designed tank coating with excellent chemical resistance. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates. Jotun Tankguard is a two component solvent free polyamine cured epoxy coating that is a general purpose tank lining with good chemical resistance. This product is no longer in stock.
Tankguard Storage Two component polyamine cured novolac epoxy coating – specially designed tank coating with excellent chemical resistance tnakguard designed for carbon, yankguard and stainless steel. Complete and submit this form for assistance from one of our specialist advisors. If used, check to ensure that filters are clean.
Can be used as a coating for potable water, grey water and crude oil tanks. Tankguard 1 tankvuard 80 microns DFT Other systems may be specified, depending on area of use.
Preferably store both paint components at 23 — 28 tankguadr C. A base to be mixed thoroughly with 1 part TankguardComp. Tankguard is a solvent-free, two-pack epoxy tank coating. Two component polyaminde cured epoxy coating. When used in drinking water tanks, do not thin. Home Production Services Info Contacts. Product description Tankguard is a solvent-free, two-pack epoxy tank coating. Jotun Tankguard Reference: Recommended for stripe coating and small areas. Containers must be kept tightly closed.
It is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of the product. Jotun Paints Description Tankguard is a two pack, solvent free, polyamine cured, epoxy coating, designed as a general purpose tank lining with good chemical resistance.
The remaining water after pumping shall jtun removed by the use of towels and rags in order to ensure that contaminants are removed. Should, however, air bubbles in the paint be a problem a coarse filter may be employed.
Other surfaces The coating may be used on other substrates. The figures given in the table are typical with:. Guiding data airless spray Pressure at nozzle 25 – 35 MPa – p.